Logically, how is a SCSI bus mapped? Explain.
One-dimensionally. Basically, every device in the bus falls upon a straight line.
Each end of the SCSI bus must be terminated - and the bus must not fork or branch in any way. The word terminated refers to a special resistor pack that prevents signals from bouncing back and forth along the SCSI chain. The manual should contain information on how to terminate such a fork or branch.
Each end of the SCSI bus must be terminated - and the bus must not fork or branch in any way. The word terminated refers to a special resistor pack that prevents signals from bouncing back and forth along the SCSI chain. The manual should contain information on how to terminate such a fork or branch.
Tags: branch, bus types, fork, hard drives, resistor, SCSI, termination
Quelle:
Quelle:
Kartensatzinfo:
Autor: Ryan Robson
Oberthema: Informatics
Thema: Linux
Ort: Houston
Veröffentlicht: 08.02.2011
Schlagwörter Karten:
Alle Karten (75)
/dev (2)
/etc (2)
101.1 (36)
acronyms (1)
architecture (1)
ata (2)
bash (1)
BIOS (5)
bios (1)
bit (1)
branch (1)
bus (2)
bus types (7)
cables (1)
clock (3)
codes (1)
commands (7)
configuration (1)
controller (1)
daemon (1)
data rates (1)
dev (1)
device types (1)
devices (5)
dmesg (1)
facilities (1)
fdisk (1)
fork (1)
fs (8)
hard drives (17)
history (1)
host adapter (1)
hwclock (1)
IEEE (1)
ISA (2)
klog (1)
linux (31)
logs (5)
lspci (1)
lsusb (1)
master (1)
modprobe (1)
naming standards (1)
options (1)
packages (1)
partitions (11)
pata (2)
PATA (6)
PCI (2)
pci (2)
priority (1)
proc (3)
RAM (1)
resistor (1)
RPM (2)
sata (3)
SATA (2)
scsi (9)
SCSI (4)
SCSI chain (1)
security (1)
slave (1)
synchronize (1)
syslog (4)
termination (2)
time (4)
type codes (2)
umount (1)
USB (1)
x86 (6)
