Which is the optimal drive setup and why:
- Two drives attached to one controller; one set to master, one set to slave.
- Each drive attached to a separate controller.
Each drive should ideally be attached to a separate controller because each controller has a limited throughput. One drive per controller allows for maximum throughput.
Tags: 101.1, hard drives, master, PATA, slave
Source:
Source:
Flashcard set info:
Author: Ryan Robson
Main topic: Informatics
Topic: Linux
City: Houston
Published: 08.02.2011
Card tags:
All cards (75)
/dev (2)
/etc (2)
101.1 (36)
acronyms (1)
architecture (1)
ata (2)
bash (1)
BIOS (5)
bios (1)
bit (1)
branch (1)
bus (2)
bus types (7)
cables (1)
clock (3)
codes (1)
commands (7)
configuration (1)
controller (1)
daemon (1)
data rates (1)
dev (1)
device types (1)
devices (5)
dmesg (1)
facilities (1)
fdisk (1)
fork (1)
fs (8)
hard drives (17)
history (1)
host adapter (1)
hwclock (1)
IEEE (1)
ISA (2)
klog (1)
linux (31)
logs (5)
lspci (1)
lsusb (1)
master (1)
modprobe (1)
naming standards (1)
options (1)
packages (1)
partitions (11)
pata (2)
PATA (6)
PCI (2)
pci (2)
priority (1)
proc (3)
RAM (1)
resistor (1)
RPM (2)
sata (3)
SATA (2)
scsi (9)
SCSI (4)
SCSI chain (1)
security (1)
slave (1)
synchronize (1)
syslog (4)
termination (2)
time (4)
type codes (2)
umount (1)
USB (1)
x86 (6)
